How to Reset Filter On Homelabs Air Purifier:Easy Way

5/5 - (1 vote)

Once you have replaced your old Homelabs air purifier filter with a new one, it is very important to reset the filter light.

Resetting the filter light can be easily done on the Homelabs air purifier, and it only takes a couple of minutes.

Some new customers get worried when they see the filter change indicator light blinking even after they have changed the filter. No need to panic; we are here to help you. In this article, we will provide complete instructions on how to reset the filter on Homelabs air purifier and why this is important ?

Why it is important to reset the filter on Homelabs air purifier ?

When you see the filter light blinking on your Homelabs air purifier, it is trying to tell you that the current filter is filled with dust particles and needs to be replaced.

After seeing this filter reset indicator blink, you must replace your air purifier filter immediately. If you ignore this indication and keep using the same filter, it may result in poor performance of the air purifier.

Your Homelabs air purifier won’t be able to give you the desired results and will fail to purify the room air.

So, you must replace the air purifier filter and also reset the filter light. Resetting the filter light plays a vital role in telling the air purifier that the old clogged filter has been replaced with a new one and it should now reset its filter change timer.

Once you have reset the filter indicator, you won’t see the light glowing, which confirms that the filter change indicator has been successfully reset.

why to Reset Filter On Homelabs Air Purifier

How to reset the filter on Homelabs air purifier ?

As suggested by the company, the Homelabs air purifier filter must be changed every six months. You will see the filter reset indicator light flashing on the top panel, suggesting that you change the filter.

Once the filter has been changed, follow the below steps to reset the filter on the Homelabs air purifier:

  • You can see the light button which has a “light bulb” icon located on the control panel of your Homelabs air purifier.
  • Long press this light button for 3-5 seconds.This will successfully reset the filter .

Some Cleaning tips for your Homelabs air purifier

  • Never use water or any other solution to clean the Homelabs air purifier.Always clean the internal and external part of the air purifier with a dry soft cloth.
  • Clean the air purifier filter with a soft dry cloth only, make sure you clean the filter gently without damaging the filter.
  • Always go through the manual provided with your model of Homelabs air purifier before cleaning it.
  • Always power off the air purifier and also remove its power cord connected to the wall switch before cleaning it.

Some best practices for your Homelabs air purifier .

  • Make sure you replace your Homelabs air purifier filter every six months. Always use an original, genuine filter for your air purifier, as 3rd-party filters can result in poor performance and also reduce the lifespan of the air purifier.
  • Keep the air purifier turned on for at least 12 hours a day.
  • Make sure to choose the right spot for your air purifier which is close to the source of pollutants like windows and kitchen.
  • Always close all doors and windows in the room where the air purifier is kept. Keeping the doors open may result in a degraded performance of the air purifier.
  • There should not be any object placed near the air purifier that is obstructing its path. So that the air purifier can easily absorb the polluted air and purify it.
  • There should not be any electrical equipment placed very near the air purifier, like refrigerators, washing machines, electrical fans, etc.

Conclusion

After replacing the old filter with a new one, the filter light on the Homelabs air purifier must be reset. Resetting the filter light conveys the message to the air purifier that the new air purifier filter has been loaded.

Filter reset can be done by continuously pressing the “Light” button for 3-5 seconds located on the control panel.

Leave a comment